- Characteristic and Advantage
- Electrical Characteristics
- Support mainstream ISO15693 protocol tag (TI, PHILIPS, ST, INFINEON, FUJITSU, EM...);
- RF output power adjustable from 0.25W to 8W(10W);
- Advanced anti-collision algorithm. High identification rate with typical tag processing speed 80pcs/s;
- Support standard 50ohm RFID antenna with effective distance up to 90cm;
- Support transparent command;
- Support tag data scan mode and EAS scan mode
- Support external input and command synchronization in scan mode;
- Support antenna failure detection;
- Support RS232, RS485,RS422,TCPIP interface with optional WiFi interface; Baud rate adjustable;
- Low power dissipation with single +24V DC needed;
- Provide DLL and demonstration software to facilitate development
CHARACTERISTICS
Absolute Maximum Rating ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 28 | V |
Optical Coupled Input/Output | Vopc | 30V/30mA |
|
Operating Temp. | TOPR | -25~+70 | ℃ |
Storage Temp. | TSTR | -35~+80 | |
Electrical and Mechanical Specification
Under TA∽25, VCC∽+24V and RF output power 4W unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT | |
Power Supply | VCC | 22 | 24 | 26 | V | |
Current Dissipation | IC |
| 0.68 | 1.2 | A | |
Frequency | FREQ |
| 13.56 |
| MHz | |
Effective Distance* | DIS | 0 | 900 | 1000 | mm | |
Relay | Rated Load | CLOAD |
|
| 0.5A at 125VAC 1A at 24VDC |
|
Operating Voltage |
|
|
| 125VAC 60VDC | V | |
Operating Current |
|
|
| 1 | A | |
Size | L x W x H |
| 170x135x63 |
| mm |
*Effective distance depends on antenna, tag and working environment.